The 3" Mk.IV Heavy Duty Fret Saw with Lever Tension ($90.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

• Weighs only 179.1 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

Don’t forget saw blades!

If you need saw blades, be sure to purchase them by the dozen for your specific craft before you checkout.

Recommended saw blades for your craft are located
on our saw blades page.

Saws come with a Pegas #7 skip tooth woodworking blade already installed and ready to use. For jewelers, please accept the blade as our gift, they’re outstanding for cutting carving wax.

The 3" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps ($114.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

The Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.

See the video The Advantages of a Swivel Blade Clamp" to see how useful these clamps can be.

• Weighs only 185.5 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

The 5" Mk.IV Heavy Duty Fret Saw with Lever Tension ($99.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

• Weighs only 214.3 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

The 5" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps ($119.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

The Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.

See the video The Advantages of a Swivel Blade Clamp" to see how useful these clamps can be.

• Weighs only 228.3 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

The 8" Mk.IV Heavy Duty Fret Saw with Lever Tension ($115.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

• Weighs only 266.4 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

The 8" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps ($145.00)

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

The Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.

See the video The Advantages of a Swivel Blade Clamp" to see how useful these clamps can be.

• Weighs only 275 grams
• Powdercoated aircraft grade aluminum
• Made in the USA

See larger image.

Download Mk.IV Saw Instructions

Slip-on Foam Comfort Grip

Available only for our Mk.III, Mk.IV,
and Titanium Fret Saws.

The simplest way to reduce the stress on your hands of long hours of sawing is to increase the diameter of the saw’s handle.

Which is where our new American made Comfort Grips come in: they increase the diameter of the saw’s handle without adding weight, while they also make the handle softer and easier to hang onto. All of which reduces hand stress and fatigue.

They just slip over the existing handles of our Mk.III, Mk.IV, and Titanium saws. They take about 15 seconds to install, by sliding them on.

Made in the USA.

The grip does not fit our Coping Saw, it has a different handle.

See larger image.